LD / LABOD 412PRO: Based on DAVID LABOGA® PS412 with FANE®
Mamzer 30 & Eminence® DV77.
Mr.Shall JMP50: Based on Marshall® JMP50 Combo from the 70s
with vintage Celestion® G12M 75Hz (Black Back with Kurt Mueller
Cones) & G12-65.
Finder Tweed 59: Based on Fender® Tweed Twin 2x12 from 1960s
with vintage Jensen® C12N & C12R.
This IR Pack is provided with .wav file format: 200ms, 24bit, 44.1
kHz, 48 kHz and 96kHz sample rates and are minimum phase aligned
to prevent problems using with other Seacow Cabs IR Packs or from
For all the users who want a good tone without spending a lot of
time there is a folder called “CAB BASICS” it’s like the IR pack on easy
mode with a single IR from each mic, it’s placed on a sweet spot that
could work as an all-purpose IR with a very balanced tone but
powerful to cut correctly in a full mix.
LL-1: 57+121 (SM21 Axe Mount clip).
LL-4: 421+57+ 121+414 (Based on Eric Valentine’s Slash mic setup
with a 414 instead a C12A.
LL-5: 7+121+ MA-301 FET (Based on John Petrucci’s “distance over
LL-6: 421+57+67+414(Metallica Black Album cab setup).
LL-7: 84+67 (Brad Paisley setup).
44: Based on AEA® R44C.
84: Based on AEA® R84.
121: Based on Royer® R121.
160: Based on Beyerdynamic® M160.
313: Based on Shure® KSM313.
4038: Based on Coles® 4038.
FHed: Based on Cascade® Fat Head.
RNR1: Based on sE Electronics® RNR1.
Condenser Mics/ Room Mics:
47F: Based on Neumann® U47 FET.
47T: Based on Neumann® U47.
49: Based on Neumann® M49.
67: Based on Neumann® U67.
84: Based on Neumann® KM84.
86: Based on Neumann® KM86.
414: Based on AKG® C414.
301F: Based on Coles® M301 FET.
7: Based on Shure® SM7B.
57M: Based on modern Shure® SM57.
57V: Based on vintage Shure® SM57.
421V: Based on vintage Sennheiser® MD421.
421M: Based on modern Sennheiser® MD421.
441: Based on Sennheiser® MD441.
545SD: Based on Shure® 545SD.
906: Based on Sennheiser®E906.